Cody.Naumann
AppDynamics Team (Retired)
since ‎01-30-2017
‎04-25-2019

User Statistics

  • 164 Posts
  • 11 Solutions
  • 19 Kudos given
  • 19 Kudos received

User Activity

  This information is available from the drive's manufacturer.   Calculate a Single Drive's IOPS For Rotating MediaFor Solid State Drives   For Rotating Media IOPS are used to define the performance of a given disk or array. To calculate the actual ...
You have a choice of either hardware or software when configuring your RAID controller. As with all hardware parity-based RAID controllers, the computation of the parity and the strip size are the two most important considerations. Hardware controll...
In this article... RAID 0RAID 1RAID 5 RAID 6RAID 10 RAID 50RAID 60   RAID 0 A RAID 0 configuration combines two or more devices by striping/spanning data across them. Striping is a technique that breaks up the data into chunks/segments/strips, a...
The following articles were compiled and written by @george.herman. To provide feedback, comment below or in the individual articles directly.   RAID Introduction RAID Types and Comparison RAID Controller Choices - Hardware vs. Software Computing RA...
RAID stands for Redundant Arrays of Independent/Inexpensive Disks. By combining drives in various configurations, administrators can achieve greater performance and/or redundancy than when the drives are operated alone.   RAID can be implemented as e...