Knowledge Base

cancel
Showing results for 
Search instead for 
Did you mean: 

How do I change Page and Ajax limits for an EUM application in an on-premise Controller?

Question

How do I change Page and Ajax limits for an EUM application in an on-premise Controller?

 

Answer

These limits can be altered, but keep in mind that more registered pages and Ajax will result in more metrics. This is a performance overhead for both EUM and the Controller (backend and UI). Therefore, you may need to back it up with better hardware resources if you see performance degradation.

To change the limits, follow the steps below:


1. Log in to http://controller_host:8090/private/ControllerFlagsServlet using the credentials below:
username: root@system
password: Same as your admin.jsp password

2. Look for appdynamics.controller.eum.cloud.ajax.limit and appdynamics.controller.eum.cloud.page.limit and change the values, then save.

 

Note: For SaaS Controllers on a shared tenant host, this cannot be done since this will impact other customers. For SaaS Controllers on a dedicated host, please raise a support ticket.

Version history
Revision #:
3 of 3
Last update:
‎08-14-2018 04:00 PM
Updated by:
 
Labels (1)
0 Kudos