EUM and Analytics (Mobile, Metrics)

cancel
Showing results for 
Search instead for 
Did you mean: 

Alert configuration based on Volume

SOLVED
2 REPLIES
New Contributor

Re: Alert configuration based on Volume

Thanks a lot Rayan that worked for me.
Community Manager

Re: Alert configuration based on Volume

Hi Shashwat, Have you tried using the mathematical expression builder to achieve this? You can take a look at a similar request in the below kb article that talks about how to create alert based on % & hard limit https://community.appdynamics.com/t5/Knowledge-Base/How-to-create-a-low-disk-space-alert-based-on-bo... Also refer our below doc link about the expression builder https://docs.appdynamics.com/display/PRO43/Configure+Health+Rules#ConfigureHealthRules-ConfigureHeal... Let us know if it helps Regards, Mohammed Rayan
New Contributor

Alert configuration based on Volume

Hey, We are using AppD in premises with controller v4.2.0.2 And in our environment we get varying traffic and we want to set the alert based on the percentage of volume (calls per minute). As in if Error > 10% of calls per minute then send me the alert. Hardcoding to a specific value is not in scene because sometimes our traffic goes to millions calls per minutes to sometimes few hundreds calls per minute. So right now what we are using is if Error > 100 (an example) --> Send alert This creates a lot of spurious alert mails which are not relevant at the peak traffic time as such amoumt of errors are expected. Please help me with this. Thanks in advance, Shashwat